Adjusting to the Wearer
 |
| Fig 3 The Loop in Use |
| Please click the graphic to see a larger version. |
Fig 3 is a diagrammatic side view of the loop in position on the wearer. The loop is set to stand away from the spectacle frame by about 3/4" at the top. This makes it bear very lightly on the upper eyelid, lifting it into the space above the eyeball. It should not bear upon the eyeball in any way as this would be very painful, so care must be taken not to pull the loop too far away from the frame.
With a little practice, the wearer will find the right spot on the lid for the loop to make contact; too low will give a "starey" look, too high will not expose the pupil enough - it should look and feel natural.